B-Bit Scheepsnavigatie

Winkelwagen

Speciaal

<< Vorige


Navigatie-PC: SunPC-ET20V - Fanless - 12 of 220V - robuust


Diverse uitvoeringen- tot 2 Tb SSD/NVMe - tot 64Gb Ram - ruime CPU keuze i3, i5, i7, Celeron APART

Artikelcode: SunPc-ET20V



Navigatie-PC: SunPC-ET20V - Fanless - 12 of 220V - robuust




Artikelnummer: SunPC-ET20V

Voor u, als watersporter, bieden wij bovendien een extra voordeel: de boord-PC kan worden voorzien van het gebruiksvriendelijke en uitgebreide navigatieprogramma ORBIT-Commander bavigatieprogramma voor een meerprijs van slechts € 65,00 (normaal  €  95.00)
Dit programma is uitgerust met de nieuwste vaarkaarten van de Nederlandse en Belgische (Vlaanderen) doorgaande vaarwateren. Deze kaarten kunnen onbeperkt, en zonder dat een internetverbinding nodig is, blijvend worden gebruikt. Jaarlijks verschijnen er wèl updates tegen zeer schappelijke prijzen, zodat u ze, indien gewenst, bijgewerkt kunt houden. Ook zijn er voor dit programma kaartensets leverbaar van alle belangrijke binnen- en buitenwaterkaarten van Europa en daarbuiten. Advies: schaf voor de Nederlandse Wadden deze combinatieset van papieren en digitale kaarten voor extra veiligheid en digitaal regelmatig (gratis)  bijgewerkte kaarten aan (complete set iclusief installatie  €   59.00 = indien meteen meebesteld).
Behalve GPS en AIS kunt u met dit programma ook boordapparatuur - zoals bijvoorbeeld een stuurautomaat - aansluiten. 
Als u dit navigatie programma samen met de laptop bestelt, bespaart u € 30.00 op het programma ORBIT-Commander en € 50,00 op de installatiekosten. 

Ook kunt u, in plaats hiervan, kiezen om de laptop te laten installeren met het programma PC-Navigo Nederland versie 2023 voor  €  250,00.
Pc-Navigo is ook leverbaar in de uitvoeringen:

BENELUX 2023  -  €  349,00
en
EUROPA 2023  -  €  499,00

PC-Navigo is hèt programma waar de beroepsvaart op vertrouwt als het gaat om nauwkeurige routeberekeningen met de nieuwste stremmingsgegevens en stromingsinvloeden.

Ook WinGPS5(6)  is een uitstekende keuze: 
Vooral voor watersporters op buitenwater heeft dit programma een zeer uitgebreide digitale kaartcollectie en voor regatta zeilers zelfs een speciaal ontwikkeld programma.
WinGPS5(6) is er in verschillende uitvoeringen:
- van een gratis testprogramma voor computer of tablet tot de meest uitgebreide informatie voor regattazeilers. Dit gecombineerd met gunstig geprijsde digitale kaarten maakt het tot een ijzersterke keuze.
- WinGPS5 Lite
- WinGPS Navigator
- WinGPS5(6) PRO
- WinGPS5(6) Voyager

U kunt ook meerdere navigatieprogramma's NAAST elkaar laten plaatsen en deze alle voorzien van dezelfde GPS en/of AIS aansluiting.

Heeft u nog geen GPS dan kunt u bij ons een zeer precieze en betrouwbare, waterproof, schokvaste, voorzien van Waas/Egnos (voor extra hoge preciesie) aanschaffen voor € 65,00.

Ook andere navigatieprogramma's - zoals bijvoorbeeld WinGPS5 in de diverse uitvoeringen - zijn leverbaar, alsmede (waterproof) 12 Volt beeldschermen, AIS apparatuur, papieren en digitale kaarten van alle vaarwateren in de wereld, enz.
Kijk hiervoor in onze webshop bij de betreffende rubrieken.

U kunt uw bestelling het beste per e-mail of telefoon opgeven zodat de verschillende mogelijkheden met u nader kunnen worden doorgenomen. Ook kunt u in de webshop (shop.b-bit.nl) nadere informatie over de verschillende producten bekijken en aan de hand hiervan uw bestelling samenstellen. Bij de opties kunt u uw componenten kiezen. U kunt meerdere keren een keuze aanklikken. Dit wordt dan bij elkaar opgeteld weergegeven. U ontvangt van ons altijd eerst een besteloverzicht met eventuele nadere informatie over levertijd, beschikbaarheid en betalings- en verzendmogelijkheden en indien van toepassing prijswijzigingen. U kunt dan deze gegevens aanpassen, of bevestigen dat de bestelling zo kan worden uitgevoerd. Daarna ontvangt u onze orderbevestiging.




ARTIKELNUMMER:  SunPc-ET20V5

S P E C I F I C A T I E S  van de uitvoering met de Intel i5 processor:

Fanless and Silent
Passive cooling, no fan noise at all
Perfect to be used in noise-sensitive environments
Fanless, dust-free and thus virtually maintenance-free
Low Power Consumption
Power consumption in idle mode with 2.5" SSD under Windows 10: ca. 6 W only
24/7 Nonstop Operation
This device is approved for 24/7 permanent operation.
Requirements:
- Free circulation of air amongst the PC must be guaranteed.
- Ventilation holes must stay clear.
- If a hard disk is installed, this must also be approved for permanent operation by its manufacturer
Chassis
Slim-PC with black steel chassis
Without cooling fan, passive cooling only
The bays for memory, 2.5" drive and M.2 card
can easily be accessed by removing two cover plates.
Dimensions: 200 x 165 x 39.5 mm (LWH) = 1.3 litres
Weight: 1.5 kg net and 2.2 kg gross
Two holes for Kensington Lock and numerous 
threaded holes (M3) at both sides of the chassis
Operating Position
1) Vertical: Usual operating position with the supplied feet (DisplayPort output facing up).
2) VESA-mounted: The device can also be mounted behind an appropriate monitor using the supplied VESA mount kit.
Note: From a thermal point of view horizontal operation is permitted. However, there are no rubber feet on the device. The maximum operating temperature is 35 °C then.
Operating System
This barebone system comes without operating system.
It is compatible with Windows 10/11 (64-bit) and Linux (64-bit).
Processor
Model: Intel Core i5-10210U (ULV)
System-on-a-chip architecture (SoC) with integrated memory and graphics controller
FCBGA1528 package - directly soldered onto the mainboard
Code name: Comet Lake U (10th Generation Intel Core)
Cores / Threads: 4 / 8
Base frequency: 1.6 GHz
Max. Turbo frequency: 4.2 GHz
Intel Smart Cache: 6 MB
TDP wattage: 15 W maximum
Manufacturing process: 14nm
Maximum Tjunction Temperature: 100 °C
Supports 64-bit, VT-x (EPT), VT-d, Enhanced SpeedStep, NX bit, AES-NI, SSE 4.1/4.2
Integrated Graphics
Intel UHD Graphics
GPU clock frequency: 300~1100 MHz
Execution Units (EUs): 24
Supports DirectX 12, OpenGL 4.5
Supports full H264, H265 8/10 bit, VP8/9, VC-1, AVC hardware decoding
Supports Quick Sync Video and Clear Video HD technology
Supports up to three independent screens:
1) DisplayPort 1.2 supports Ultra HD @ 60 Hz
2) HDMI 2.0a supports Ultra HD @ 60 Hz
3) D-Sub/VGA supports analog displays
Mainboard / BIOS
Shuttle Mainboard FS20
All capacitors are high quality solid capacitors
Supports resume after power failure [6]
Supports Wake on LAN (WOL)
Supports Power on by RTC Alarm
Supports boot from M.2 SSD cards und USB devices
AMI BIOS in 16 MByte EEPROM with SPI interface
Supports hardware monitoring and Watchdog function
Supports Unified Extensible Firmware Interface (UEFI)
Supports Firmware-TPM (fTPM) Version 2.0
Power Adapter
External 65 W power adapter (fanless)
Input: 100~240 V AC, 50/60 Hz, max. 1.6 A
Output: 19 V DC, max. 3.42 A, max. 65 W
DC cable length: ca. 170 cm
AC cable length: ca. 170 cm (3-pin Micky MM C6 and Schuko earthed safety plug)
DC Input connector
DC Input Connector: 5.5 / 2.5 mm (outer/inner diameter)
The DC-input of the computer supports an external
power source with either 12V±5% or 19V±5%.
Memory support
2x SO-DIMM slot with 260 pins
Supports DDR4-2666 (PC4-21300) SDRAM at 1.2 V
Supports DDR4-3200 at 2666 MHz
Supports Dual Channel mode
Supports a maximum of 32 GB per DIMM,
maximum total size: 64 GB
Supports two unbuffered DIMM modules (no ECC or registered)
2.5" Drive Bay with SATA connector
Supports one Serial ATA hard disk
or one SATA SSD drive in 6.35 cm / 2.5" format
Device height: max. 12.5 mm
Supports Serial-ATA III, 6 Gb/s (600 MB/s) bandwidth
Supports Unified Extensible Firmware Interface (UEFI)
Note: no Serial ATA cable is required.
M.2 Slot for SSDs
The M.2 2280 BM slot provides the following interfaces:
- PCI-Express Gen. 3.0 X4
- SATA v3.0 (max. 6 Gbps)
It supports M.2 cards with a width of 22 mm
and a length of 42, 60 or 80 mm (type 2242, 2260, 2280).
Supports M.2 SATA SSDs (with B+M key) and M.2 PCIe NVMe SSDs (with M key)
Supplied thermal pad for cooling M.2 SSDs.
M.2-2230E slot for WLAN cards
Interfaces: PCI-Express Gen. 2.0 X1 und USB 2.0
Supports M.2 cards with a width of 22 mm and a length of 30 mm (type 2230)
Supports WLAN expansion cards (optional Shuttle accessory: WLN-M / WLN-M1)
2x pre-installed antenna cables
Card Reader
Integrated SD card reader
Supports SD, SDHC and SDXC memory flash cards
Audio
Audio Realtek® ALC897 or ALC 662 High-Definition Audio
Two analog audio connectors (3.5 mm) at the front panel:
1) 2 channel line out (headphones)
2) microphone input
Digital multi-channel audio output: via HDMI and DisplayPort
Dual LAN (2.5G + 1G)
Dual network with two RJ45 ports
Used network chips:
1) left: Intel i211 Ethernet Controller supports 2.500 / 1.000 / 100 Mbps operation
2) right: Intel i219 Ethernet Controller supports 1.000 / 100 / 10 Mbps operation
Supports WAKE ON LAN (WOL)
Supports network boot by Preboot eXecution Environment (PXE)
Prepared for Wireless Network (WLAN)
2x pre-installed antenna cables (WLAN card and antennas not included)
Prepared for the installation of an M.2-2242 WLAN card and two external antennas
Front Panel connectors/buttons
2x USB 3.2 Gen 2 (red, max. 10 Gbps)
4x USB 2.0
Microphone input
Audio Line-out (headphones)
SD card reader (supports SD, SDHC, SDXC)
Power button
Power LED (blue)
HDD LED (yellow)
Back Panel connectors
DisplayPort 1.2 [3]
HDMI 2.0a
D-Sub/VGA
2x USB 3.2 Gen 2 (red, max. 10 Gbps)
2x Intel RJ45 LAN (left: 2.5 Gbps and right: 1 Gbps)
Serial COM port (5V / 12V, switchable to RS232 / RS422 / RS485) [1]
DC-input connector for external power adapter
4-pin connector (2.54 mm pitch) for power button, Clear CMOS and 5 V DC [4]
Always-On Jumper
By removing Jumper J9 (please refer to the quick user guide),
the system will start unconditionally once power is applied. [6]
Scope of Delivery
Multi-language user guide
Two metal feet with four screws M3 x 7 mm
VESA mount for 75/100mm standard (two metal brackets)
Four screws M3 x 7 mm (screws together VESA mount and PC)
Four screws M4 x 10 mm (to fix the VESA mount to the external surface)
Two screws M3 x 5 mm to mount a 2.5" storage in the bay
Two screws M3 x 5 mm to mount M.2 cards
Thermal pad for cooling M.2 SSDs
Driver DVD for Windows
External 65W power adapter with power cord (with protective-earth contacts)
Optional Accessories
- PCP11: adapter cable for the second COM port (replaces the VGA port)
- CXP01: adapter cable for external power button
- WWN03: LTE adapter kit for the 2.5" bay including two external LTE antennas [2]
- WLN-M / WLN-M1: WLAN module (supports WLAN/Bluetooth) with two external antennas and cables
- PRM01: 2U rack mount front plate for two Shuttle XPC slim
- DIR01: mounting kit for 35 mm DIN-Rail
Environmental Specifications
Operating temperature range: 0~40 °C [5]
Relative humidity, non-condensing: 10~90 %
Conformity & Certifications
EMI: CE, FCC, BSMI, RCM, VCCI
Safety: CB, BSMI, cTUVus
Other: RoHS, Energy Star, ErP
This device is classed as a technical information equipment (ITE) in class B and is intended for use in living room and office. The CE-mark approves the conformity by the EU directives:
(1) 2014/30/EU relating to electromagnetic compatibility (EMC)
(2) 2014/35/EU relating to Electrical Equipment designed for use within certain voltage limits (LVD)
(3) 2009/125/EC relating to eco design requirements for energy-related products (ErP)
Footnote:

[1] Jumper for COM port configuration
Pin 9 of the COM-Port is a multi-functional signal. Based on the Jumper JP1 configuration on the mainboard, it can be configured as Ring Indicator (RI) or external power supply with a voltage level of either 5 V or 12 V. Each COM port can be configured separately. The operating mode of COM 1 can be set to RS232, RS422 or RS485 in the BIOS.
The second COM port (COM 2) supports RS232 mode only, and in the standard SKU of this product it is only available as an onboard connector on the mainboard. An appropriate adapter (e.g. the optional accessory PCP11) is required in order to provide this port as D-Sub connector at the back panel. In this case the VGA port cannot be used.

[2] LTE Adapter Kit WWN03
Using the LTE adapter kit WWN03 means, that the 2.5" bay can no longer be used for SATA drives in 2.5" format (hard disk or SSD). An SSD card in the M.2-2280 format must be used instead.

[3] How to convert DisplayPort into HDMI/DVI
The DisplayPort output can be converted to HDMI or DVI by an additional, passive adapter cable. For example:
DELOCK 82590: 1 m, DisplayPort (male, 20p) to HDMI-A (male, 19p)
DELOCK 82435: 5 m, DisplayPort (male, 20p) to DVI-D (male, 24p)
The integrated graphics automatically detects the connected display and puts out the appropriate electric signal - either through DisplayPort (without an adapter) or HDMI/DVI (with an adapter).
However, a monitor with a DisplayPort connector cannot be connected to the HDMI port with a simple, passive adapter.

[4] Four-pin header at the back panel
This header allows for connecting an external power button.
It also provides 5 V DC voltage for external devices and the Clear CMOS function. Optional accessory: the adapter cable CXP01.

[5] Caution: For ambient temperatures higher than 35 °C we strongly recommend to use an SSD instead of an HDD

[6] Power on after power fail:
The BIOS setup provides a "Power-On after Power Fail" function that can be found under "Power Management Configuration". This function determines the PC's behaviour after power failure. As a matter of the nature of this function, it may fail after short power failures. This is why this product also comes with a hardware-based solution. By removing Jumper J9 (please refer to the quick user guide), the system will start unconditionally once power is applied.


Artikelnummer:  SunPc-ET20V

                                       S P E C I F I C A T I E S 

Specificaties SunPc-ET20V met Intel Celeron 5205U

SLIM DESIGN 
 Slim 1.3-litre metal chassis, black 
 Dimensions: 20 x 16.5 x 3.95 cm (LWH) 
 Including Stand and VESA mount (75/100 mm) 
 Supports 24/7 Nonstop Operation  Operating temperature: 0~40 °C (non-condensing) 

OPERATING SYSTEM 
 An operating system is not included 
 Supports Windows 10/11 and Linux (64-bit) 

PROCESSOR 
 Intel Celeron 5205U processor, Dual-Core, 1.9 GHz, Gen. 10, codename "Comet Lake-U", max. 15W TDP 
 Fanless heatpipe cooling system 

GRAPHICS 
 Integrated Intel UHD graphics, 4K support (features depend on processor) 
 Supports three independent displays 

MEMORY SUPPORT 
 2x 260-pin SO-DIMM slot 
 Supports DDR4-2400 
 max. 2x 32 GB 

STORAGE – SATA / M.2 
 1x 2.5" bay for SATA hard disk or SSD 
 1x M.2-2280M slot (supports PCIe x4 NVMe or SATA) 
 1x M.2-2230E for optional 

WLAN 

CONNECTORS 
 HDMI 2.0a  DisplayPort 1.2  VGA 
 SD card reader 
 2x audio (line out, mic)  4x USB 3.2 Gen1  4x USB 2.0  1x internal USB 2.0 
 2x Intel Gigabit LAN (RJ45) 
 1x COM port (1x RS232/422/485) 
 Connector for external power button 
 "Always on" Jumper 
 DC-input 12 V or 19 V POWER SUPPLY 
 External 65W/19V power adapter (also supports 12 V power adapter) 

OPTIONAL ACCESSORIES 
 WLAN Module (WLN-M / WLN-M1) 
 LTE-kit (WWN03) 
 Rackmount kit (PRM01) 
 Cable for external power button (CXP01) 
 DIN-Rail mounting kit (DIR01) 
 2nd COM port RS232 (PCP11)

ACCESSOIRES:


CXP01
Cable for external push button switch
Some B-Bit XPCs have a handy connector at the back panel to connect an external power button. In case the XPC is installed in a scenario where it cannot be accessed directly, be it VESA-mounted or otherwise remotely installed, it can still be powered on or off conveniently by using an external push button switch. B-Bit therefore provides a 2-metre cable with fitting connections that only requires a push button switch.

  • Cable
    Shielded, industry-standard cable
    Length: ca. 2 metres
    Outer diameter: 6.5 mm
    Two-pole cable: 2x 0.34 mm²
    Colour: Black
  • Connector
    Dual header connector, 2.54 mm pitch
    Two female crimp contact pins, tin-plated
  • Required push button switch
    The cable provides tin-plated leads for a push button switch of your choice.
    The connection to the external power button can be screw-type or soldering.
  • Compatibility
    The cable can be used with the following B-Bit XPC models:
    SunPC-ET10Vx






WLN-M
Wi-Fi expansion
SunPC-ET10Vx


WWN03
2.5“ adapter for 4G modules
SUNPC-ET10V, SUNPC-ET10V3, SUNPC-ET10V5, SUNPC-ET10V7





769.00  Euro 695.00








Aantal