B-Bit Scheepsnavigatie

Winkelwagen

Speciaal

<< Vorige


Navigatie-PC: SunPC-ET50V - Fanless - 12 en 220V - robuust


Diverse uitvoeringen- tot 2 Tb SSD/NVMe - tot 64Gb Ram - veel CPU keuze i3, i5, i5ULTRA, i7, Celeron

Artikelcode: SunPC-ET50V



Navigatie-PC: SunPC-ET50V - Fanless - 12 en 220V - robuust




SPECIFICATIES B-Bit Boordcomputer SunPC-ET50V
Artikelnummer:  SunPC-ET50V



  • Fanless and Silent
    Passive cooling, no fan noise at all
    Perfect to be used in noise-sensitive environments
    Fanless, dust-free and thus virtually maintenance-free
  • 24/7 Nonstop Operation
    This device is approved for 24/7 permanent operation.
    Requirements:
    - Free circulation of air amongst the PC must be guaranteed.
    - Ventilation holes must stay clear.
    - If a hard disk is installed, this must also be approved for permanent operation by its manufacturer
  • Chassis
    Slim-PC with black steel chassis
    Without cooling fan, passive cooling only
    The bay for memory modules, 2.5" drive and M.2 cards can easily be accessed 
    by removing the bottom chassis cover.
    Dimensions: 200 x 165 x 39.5 mm (LWH) = 1.3 litres
    Weight: 1.6 kg net and 2.3 kg gross
    Two holes for Kensington Lock and numerous 
    threaded holes (M3) at both sides of the chassis
  • Operating Position
    1) Vertical: Usual operating position with the supplied feet (DisplayPort output facing up).
    2) VESA-mounted: The device can also be mounted behind an appropriate monitor using the supplied VESA mount kit.
    Note: From a thermal point of view horizontal operation is permitted. However, there are no rubber feet on the device. The maximum operating temperature is 35 °C then.
  • Operating System
    This barebone system comes without operating system.
    It is compatible with Windows 10/11 (64-bit) and Linux (64-bit).
  • Processor
    Model: Intel Core i5-1335U (Ultra)
    Code name: Raptor Lake-U (13th generation Intel Core)
    Performance-cores (P-Cores): 2 cores (4 threads), Basic/Turbo clock: 1.3-4.6 GHz
    Efficient-cores (E-Cores): 8 cores (8 threads), Basic/Turbo clock: 0.9-3.4 GHz
    Smart-Cache (L3): 12 MB
    Base Power (PL1 TDP): max. 15 W
    Maximum Tjunction Temperature: 100 °C
    System-on-a-chip architecture (SoC) with integrated memory and graphics controller
    BGA1700 package - directly soldered onto the mainboard
    Lithography: Intel 7 process (10 nm Enhanced SuperFin)
  • Integrated Graphics
    Intel UHD Graphics
    GPU clock frequency: max. 1250 MHz
    Execution Units (EUs): 80
    Supports up to three independent screens:
    1) DisplayPort 1.4 supports Ultra HD @ 60 Hz
    2) HDMI 2.0b supports Ultra HD @ 60 Hz
    3) D-Sub/VGA supports analog displays
  • Mainboard / BIOS
    Proprietary Mainboard for the B-Bit ET50V series
    Supports resume after power failure [2]
    Supports Wake on LAN (WOL)
    Supports Power on by RTC Alarm
    Supports boot from M.2 SSD cards und USB devices
    AMI BIOS in 32 MByte EEPROM with SPI interface
    Supports hardware monitoring and Watchdog function
    Supports Unified Extensible Firmware Interface (UEFI)
    Supports Firmware-TPM (fTPM) Version 2.0
  • Power Adapter
    External 90 W power adapter (fanless)
    Input: 100~240 V AC, 50/60 Hz, max. 1.6 A
    Output: 19 V DC, max. 4.74 A, max. 90 W
    DC cable length: ca. 170 cm
    AC cable length: ca. 170 cm (3-pin Micky MM C6 and Schuko earthed safety plug)
  • DC Input connector
    DC Input Connector: 5.5 / 2.5 mm (outer/inner diameter)
    The DC-input of the computer supports an external
    power source with either 12V±5% or 19V±5%.
  • Memory support
    2x SO-DIMM slot with 262 pins
    Supports DDR5-5200 (PC5-41600) SDRAM at 1.1 V
    Supports memory modules with higher frequency rating
    Supports Dual Channel mode
    Supports a maximum of 32 GB per DIMM,
    maximum total size: 64 GB
    Supports two unbuffered DIMM modules (no ECC or registered)
    Two thermal pads for the RAM modules are included
  • 2.5" Drive Bay with SATA connector
    Supports one Serial ATA hard disk
    or one SATA SSD drive in 6.35 cm / 2.5" format
    Device height: max. 9.5 mm
    Supports Serial-ATA III, 6 Gb/s (600 MB/s) bandwidth
    Supports Unified Extensible Firmware Interface (UEFI)
    Note: no Serial ATA cable is required.
  • Two M.2-2280 Slots for SSD cards
    This product features two M.2-2280 Key-M slots
    - it supports M.2 cards with a width of 22 mm and a length of 80 mm (type 2280)
    - one M.2 SSD card with PCIe/NVMe interface is supported
    - the second M.2 SSD card must have SATA interface
    - the second slot can also be used for the optional WWN04 kit to support a 4G/5G wireless network card
    The following configurations are supported:
M.2 Slot
Inferfaces
Config 1
Config 2
Config 3
Slot 1
PCIe Gen4 x4
SATA 3.0
M.2 SSD card
(SATA)
M.2 SSD card
(PCIe/NVMe)
M.2 SSD card
(SATA)
Slot 2
PCIe Gen4 x4
USB 3.2 Gen2 *)
M.2 SSD card
(PCIe/NVMe)
optional
WWN04 kit
optional
WWN04 kit
  • *) the USB 3.2 interface can only be used with the B-Bit Accessory WWN04
    Two thermal pads for the M.2 SSDs are included (size: 70 x 20 mm).
  • M.2 slot for WLAN cards
    Slot: M.2-2230 Type E
    Interfaces: PCI-Express Gen. 3.0 X1 und USB 2.0
    Supports M.2 cards with a width of 22 mm and a length of 30 mm (type 2230)
    Two antenna cable are pre-installed.
    A WLAN expansion card in M.2-2230 format and two WLAN antennas are required for the WLAN function.
    Optional B-Bit accessory: WLN-M1
  • Audio
    Audio Realtek® ALC888S High-Definition Audio
    Two analog audio connectors (3.5 mm) at the front panel:
    1) 2 channel line out (headphones)
    2) microphone input
    Digital multi-channel audio output: via HDMI and DisplayPort
  • Dual LAN (2.5G + 1G)
    Dual network with two RJ45 ports
    Used network chips:
    1) left: Intel i219 Ethernet Controller supports 1.000 / 100 / 10 Mbps operation
    2) right: Intel i226 Ethernet Controller supports 2.500 / 1.000 / 100 Mbps operation
    Supports WAKE ON LAN (WOL)
    Supports network boot by Preboot eXecution Environment (PXE)
  • Front Panel connectors/buttons
    4x USB 3.2 Gen 1 (max. 5 Gbps, blue)
    2x USB 3.2 Gen 2 (max. 10 Gbps, red)
    Microphone input
    Audio Line-out (headphones)
    Power button
    Power LED (blue)
    HDD LED (yellow)
  • Back Panel connectors
    DisplayPort 1.4 [3]
    HDMI 2.0b
    D-Sub/VGA
    2x USB 2.0 (black)
    2x Intel RJ45 LAN (left: 1 Gbps and right: 2.5 Gbps)
    Serial COM port (5V / 12V, switchable to RS232 / RS422 / RS485) [1]
    DC-input connector for external power adapter
    4-pin connector (2.54 mm pitch) for power button, Clear CMOS and 5 V DC [4]
    2x connector for external WLAN antennas
  • Always-On Jumper
    By removing Jumper JP1 (please refer to the quick user guide),
    the system will start unconditionally once power is applied. [2]
  • Scope of Delivery
    Multi-language user guide
    Two metal feet with four screws M3 x 7 mm
    VESA mount for 75/100mm standard (two metal brackets)
    Four screws M3 x 7 mm (screws together VESA mount and PC)
    Four screws M4 x 10 mm (to fix the VESA mount to the external surface)
    Two screws M3 x 5 mm to mount a 2.5" storage in the bay
    Two screws M3 x 5 mm to mount M.2 cards
    4x Thermal Pad for cooling of optional components:
    - 2x for M.2 SSD cards (ca. 70 x 20 x 4 mm)
    - 2x for RAM modules (ca. 50 x 15 x 2 mm and 60 x 20 x 1 mm)
    Driver DVD for Windows
    External 90W power adapter with power cord (with protective-earth contacts)
  • Optional Accessories
    PCP11: adapter cable for the second COM port (replaces the VGA port)
    CXP01: adapter cable for external power button
    WLN-M1: WLAN module (supports WLAN/Bluetooth) with two external antennas and cables
    PRM01: 2U rack mount front plate for two B-Bit XPC slim
    DIR01: mounting kit for 35 mm DIN-Rail
    WWN04: 4G/5G kit with antennas - enables the use of an optional 4G/5G card in M.2 format and a nano SIM card
  • Environmental Specifications
    Operating temperature range: 0~40 °C [5]
    Relative humidity, non-condensing: 10~90 %
  • Conformity & Certifications
    EMI: CE, FCC, BSMI, RCM, VCCI
    Safety: CB, BSMI, cTUVus
    Other: RoHS, Energy Star, ErP
    This device is classed as a technical information equipment (ITE) in class B and is intended for use in living room and office. The CE-mark approves the conformity by the EU directives:
    (1) 2014/30/EU relating to electromagnetic compatibility (EMC)
    (2) 2014/35/EU relating to Electrical Equipment designed for use within certain voltage limits (LVD)
    (3) 2009/125/EC relating to eco design requirements for energy-related products (ErP)
Footnote:
[1] Jumper for COM port configuration
Pin 9 of the COM-Port is a multi-functional signal. Based on the Jumper JP2 configuration on the mainboard, it can be configured as Ring Indicator (RI) or external power supply with a voltage level of either 5 V or 12 V. Each COM port can be configured separately. The operating mode of COM 1 can be set to RS232, RS422 or RS485 in the BIOS.
The second COM port (COM 2) supports RS232 mode only, and in the standard SKU of this product it is only available as an onboard connector on the mainboard. An appropriate adapter (e.g. the optional accessory PCP11) is required in order to provide this port as D-Sub connector at the back panel. In this case the VGA port cannot be used.

[2] Power on after power fail:
The BIOS setup provides a "Power-On after Power Fail" function that can be found under "Power Management Configuration". This function determines the PC's behaviour after power failure. As a matter of the nature of this function, it may fail after short power failures. This is why this product also comes with a hardware-based solution. By removing Jumper J9 (please refer to the quick user guide), the system will start unconditionally once power is applied.

[3] How to convert DisplayPort into HDMI/DVI
The DisplayPort output can be converted to HDMI or DVI by an additional, passive adapter cable. For example:
DELOCK 82590: 1 m, DisplayPort (male, 20p) to HDMI-A (male, 19p)
DELOCK 82435: 5 m, DisplayPort (male, 20p) to DVI-D (male, 24p)
The integrated graphics automatically detects the connected display and puts out the appropriate electric signal - either through DisplayPort (without an adapter) or HDMI/DVI (with an adapter).
However, a monitor with a DisplayPort connector cannot be connected to the HDMI port with a simple, passive adapter.

[4] Four-pin header at the back panel
This header allows for connecting an external power button.
It also provides 5 V DC voltage for external devices and the Clear CMOS function. Optional accessory: the adapter cable CXP01.

[5] Caution: For ambient temperatures higher than 35 °C we strongly recommend to use an SSD instead of an HDD



Artikelnummer: SunPC-ET50V

Voor u, als watersporter, bieden wij bovendien een extra voordeel: de boord-PC kan worden voorzien van het gebruiksvriendelijke en uitgebreide navigatieprogramma ORBIT-Commander bavigatieprogramma voor een meerprijs van slechts € 65,00 (normaal  €  95.00)
Dit programma is uitgerust met de nieuwste vaarkaarten van de Nederlandse en Belgische (Vlaanderen) doorgaande vaarwateren. Deze kaarten kunnen onbeperkt, en zonder dat een internetverbinding nodig is, blijvend worden gebruikt. Jaarlijks verschijnen er wèl updates tegen zeer schappelijke prijzen, zodat u ze, indien gewenst, bijgewerkt kunt houden. Ook zijn er voor dit programma kaartensets leverbaar van alle belangrijke binnen- en buitenwaterkaarten van Europa en daarbuiten. Advies: schaf voor de Nederlandse Wadden deze combinatieset van papieren en digitale kaarten voor extra veiligheid en digitaal regelmatig (gratis)  bijgewerkte kaarten aan (complete set inclusief installatie  €   59.00 = indien meteen meebesteld).
Behalve GPS en AIS kunt u met dit programma ook boordapparatuur - zoals bijvoorbeeld een stuurautomaat - aansluiten. 
Als u dit navigatie programma samen met de laptop bestelt, bespaart u € 30.00 op het programma ORBIT-Commander en € 50,00 op de installatiekosten. 

Ook kunt u, in plaats hiervan, kiezen om de laptop te laten installeren met het programma PC-Navigo Nederland versie 2024 voor  €  250,00.
Pc-Navigo is ook leverbaar in de uitvoeringen:

BENELUX 2024  -  €  349,00
en
EUROPA 2024  -  €  499,00

PC-Navigo is hèt programma waar de beroepsvaart op vertrouwt als het gaat om nauwkeurige routeberekeningen met de nieuwste stremmingsgegevens en stromingsinvloeden.

Ook WinGPS5(6)  is een uitstekende keuze: 
Vooral voor watersporters op buitenwater heeft dit programma een zeer uitgebreide digitale kaartcollectie en voor regatta zeilers zelfs een speciaal ontwikkeld programma.
WinGPS5(6) is er in verschillende uitvoeringen:
- van een gratis testprogramma voor computer of tablet tot de meest uitgebreide informatie voor regattazeilers. Dit gecombineerd met gunstig geprijsde digitale kaarten maakt het tot een ijzersterke keuze.
- WinGPS5 Lite
- WinGPS Navigator
- WinGPS5(6) PRO
- WinGPS5(6) Voyager

U kunt ook meerdere navigatieprogramma's NAAST elkaar laten plaatsen en deze alle voorzien van dezelfde GPS en/of AIS aansluiting.

Heeft u nog geen GPS dan kunt u bij ons een zeer precieze en betrouwbare, waterproof, schokvaste, voorzien van Waas/Egnos (voor extra hoge preciesie) aanschaffen voor € 65,00,
of,
de door PC-Navigo geadviseerde AIS ZENDER N ONTVANGER, als complete set inclusief de bijbehorend DPS en AIS antenne alsmede bekabeling en montagemateriaal voor de actieprijs van  €  575,00. Beide prijzen incl. BTW.

Ook  leverbaar zijn: (waterproof) 12 Volt (zonlichtafleesbare) beeldschermen, AIS apparatuur, papieren en digitale kaarten van alle vaarwateren in de wereld, enz.
Kijk hiervoor in onze webshop bij de betreffende rubrieken.

U kunt uw bestelling het beste per e-mail of telefoon opgeven zodat de verschillende mogelijkheden met u nader kunnen worden doorgenomen zodat u zeker weet de juiste keuzes te hebben gemaakt.

Natuurlijk kunt u ook in de webshop (shop.b-bit.nl) nadere informatie over de verschillende producten bekijken en aan de hand hiervan uw bestelling samenstellen en - indien gewenst - met ons bespreken. Bij de opties kunt u uw componenten kiezen. U kunt meerdere keren een keuze aanklikken. Dit wordt dan bij elkaar opgeteld weergegeven. U ontvangt van ons altijd eerst een besteloverzicht met eventuele nadere informatie over levertijd, beschikbaarheid en betalings- en verzendmogelijkheden en indien van toepassing prijswijzigingen. U kunt dan deze gegevens aanpassen, of bevestigen dat de bestelling zo kan worden uitgevoerd. Pas daarna ontvangt u onze orderbevestiging.





Artikelnummer:  SunPC-ET20V

Binnenkort wordt ook deze uitvoering vervangen door de SunPC-ET50V.
Deze uiterst energiezuinige, zeer robuuste 24/7 gunstig geprijsde Boord-PC wordt vooral gekozen als "dedicated" navigatie-apparaat voor gebruik aan boord van zeilschepen voor lange zeereizen.
Het doet alles wat u van een computer aan boord verwacht, behalve taken zoals het snel bewerken van films en videos of zware videospellen en andere vergelijkbare taken.
De boord-PC SunPC-ET50V uitgerust met de Intel i5-1335 Ultra processor daarentegen is tegen de zwaarste taken opgewassen. 

                                       S P E C I F I C A T I E S 

Specificaties SunPc-ET20V met Intel Celeron 5205U

SLIM DESIGN 
 Slim 1.3-litre metal chassis, black 
 Dimensions: 20 x 16.5 x 3.95 cm (LWH) 
 Including Stand and VESA mount (75/100 mm) 
 Supports 24/7 Nonstop Operation  Operating temperature: 0~40 °C (non-condensing) 

OPERATING SYSTEM 
 An operating system is not included 
 Supports Windows 10/11 and Linux (64-bit) 

PROCESSOR 
 Intel Celeron 5205U processor, Dual-Core, 1.9 GHz, Gen. 10, codename "Comet Lake-U", max. 15W TDP 
 Fanless heatpipe cooling system 

GRAPHICS 
 Integrated Intel UHD graphics, 4K support (features depend on processor) 
 Supports three independent displays 

MEMORY SUPPORT 
 2x 260-pin SO-DIMM slot 
 Supports DDR4-2400 
 max. 2x 32 GB 

STORAGE – SATA / M.2 
 1x 2.5" bay for SATA hard disk or SSD 
 1x M.2-2280M slot (supports PCIe x4 NVMe or SATA) 
 1x M.2-2230E for optional 

WLAN 

CONNECTORS 
 HDMI 2.0a  DisplayPort 1.2  VGA 
 SD card reader 
 2x audio (line out, mic)  4x USB 3.2 Gen1  4x USB 2.0  1x internal USB 2.0 
 2x Intel Gigabit LAN (RJ45) 
 1x COM port (1x RS232/422/485) 
 Connector for external power button 
 "Always on" Jumper 
 DC-input 12 V or 19 V POWER SUPPLY 
 External 65W/19V power adapter (also supports 12 V power adapter) 

OPTIONAL ACCESSORIES 
 WLAN Module (WLN-M / WLN-M1) 
 LTE-kit (WWN03) 
 Rackmount kit (PRM01) 
 Cable for external power button (CXP01) 
 DIN-Rail mounting kit (DIR01) 
 2nd COM port RS232 (PCP11)

ACCESSOIRES:


CXP01
Cable for external push button switch
Some B-Bit XPCs have a handy connector at the back panel to connect an external power button. In case the XPC is installed in a scenario where it cannot be accessed directly, be it VESA-mounted or otherwise remotely installed, it can still be powered on or off conveniently by using an external push button switch. B-Bit therefore provides a 2-metre cable with fitting connections that only requires a push button switch.

  • Cable
    Shielded, industry-standard cable
    Length: ca. 2 metres
    Outer diameter: 6.5 mm
    Two-pole cable: 2x 0.34 mm²
    Colour: Black
  • Connector
    Dual header connector, 2.54 mm pitch
    Two female crimp contact pins, tin-plated
  • Required push button switch
    The cable provides tin-plated leads for a push button switch of your choice.
    The connection to the external power button can be screw-type or soldering.
  • Compatibility
    The cable can be used with the following B-Bit XPC models:
    SunPC-ET10Vx






WLN-M
Wi-Fi expansion
SunPC-ET10Vx


WWN03
2.5“ adapter for 4G modules
SUNPC-ET10V, SUNPC-ET10V3, SUNPC-ET10V5, SUNPC-ET10V7





799.00  Euro 735.00








Aantal